This product is PCI Express bus-compliant interface board that output signals to lead relay contacts. It is equipped with 32 points of reed relay output. It is one common by eight points of units. The output rating is designed to greatest 0.5A 100VDC per one point, eight points of total (per one common) maximum 1A, 10W in capacity at the maximum.
Certification
Environmental
RoHS Directive
Features
- RRY-32-PE has 32 reed relay outputs with a single make contact. Common terminal provided per 8 channels, capable of supporting a different external power supply. Output ratings are designed for a maximum of 100VDC and 500 mA per channel, a maximum of 1A for each group (one group of eight channels share a minus common). Relay contactor rating is 10W maximum.
- Using the attached driver library API-PAC(W32) makes it possible to create applications of Window/Linux. In addition, a diagnostic program by which the operations of hardware can be checked is provided.
- There is compatibility in terms of connector shape and pin assignments with the board RRY-32(PCI)H. As for relay point of contact specifications, only DC (direct current) is the same.
- You should use CONTEC support software according to your purpose and development environment.
- VI-DAQ is created with a function form similar to that of LabVIEW's Data Acquisition VI, allowing you to use various devices without complicated settings.
Specification
Digital I/O
Response speed Output:1msec(max.)
Operation voltage Output: --100VDC
Output circuit Lead relay point-of-contact output
Options
Product Code |
Product |
ACX-PAC(W32) Ver.5.0 |
ActiveX components sets for measurement system development |
API-DIO(LNX) |
Linux版数字量I/O驱动程序 |
EPD-37 |
Screw Terminal (M3.5 x 37) |
EPD-37A |
Screw Terminal (M3 x 37) |
PCA37P-1.5 |
37pin D-type(M) to Open-Ended, Flat Cable(1.5m) |
PCA37P-3 |
37pin D-type(M) to Open-Ended, Flat Cable(3m) |
PCA37P-5 |
37pin D-type(M) to Open-Ended, Flat Cable(5m) |
PCA37PS-0.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m) |
PCA37PS-1.5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m) |
PCA37PS-3P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 3m) |
PCA37PS-5P |
A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 5m) |
PCB37P-1.5 |
37pin D-type(M) at Each End, Flat Cable(1.5m) |
PCB37P-3 |
37pin D-type(M) at Each End, Flat Cable(3m) |
PCB37P-5 |
37pin D-type(M) at Each End, Flat Cable(5m) |
PCB37PS-0.5P |
37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost |
PCB37PS-1.5P |
37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost |
PCB37PS-3P |
37pin D-type(M) at Each End, Shield Cable(3m) Low Cost |
PCB37PS-5P |
37pin D-type(M) at Each End, Shield Cable(5m) Low Cost |
VI-DAQ |
LabVIEW用数据采集VI程序库 | |