This product is an USB2.0-compliant digital I/O unit that extends the input/output function of bi-directional digital signal. This product has up to 48 unisolated TTL-level input/output channels that is powered by the equivalence to the mode 0 ofi8255 chips, and you can use up to 48 channels of the input signals as interrupt inputs. You can select the input/output by the application software in eight signals units (in four signals unit for some inputs/outputs). As there is compatible with PCI bus-compatible board DIO-48D2-PCI and PCI Express bus-compatible board DIO-48D-PE in terms of connector shape and pin assignments, it is easy to migrate from the existing system. Windows driver is bundled with this product. Possible to be used as a data recording device for LabVIEW, with dedicated libraries.
Certification
Environmental
RoHS
Features
- This product has up to 48 unisolated TTL-level input/output channels whose response speed is 200nsec that is powered by to the equivalence to the mode 0 of i8255 device for general-purpose. You can select the input/output by the application software in eight signals units (in four signals unit for some inputs/outputs).
- You can use up to 48channels of the input signals as interrupt events and also disable or enable the interrupt in bit units and select the edge of signals, at which to generate an interrupt.
- This product has a digital filter to prevent wrong recognition of input signals from carrying noise or a chattering. All input terminals can be added a digital filter, and the setting can be performed by software.
- This product has the USB HUB function. Max. 4 DIO-48DX-USB can be used in 1 USB port of PC. When you use 4 or more DIO-48DX-USB, you can do by connecting DIO-48DX-USB to another USB port of PC side. Also, you can connect the CONTEC's USB device other than DIO-48DX-USB to the USB port of DIO-48DX-USB.
- As there is compatible with DIO-48D2-PCI and DIO-48D-PE in terms of connector shape and pin assignments, it is easy to migrate from the existing system. If the system of this product is created by the digital I/O driver API-DIO(98/PC), it is required to replace it with API-DIO(WDM).
- Using the attached digital I/O driver API-DIO(WDM) makes it possible to create applications of Windows. In addition, a diagnostic program by which the operations of hardware can be checked is provided.
Specification
Digital I/O
Response speed 200nsec(max.)
Operation voltage Input: 5VDC-TTL
Operation voltage Output: 5VDC-TTL
Input circuit LVTTL level input (Positive logic)
Output circuit TTL level output (Positive logic)
Page Top
Options
| Product Code |
Product |
| BRK-USB-X |
USB I/O Unit Bracket for X series |
| CN5-H96F |
96 pin half pitch connectors(A female) Five-piece Set |
| DTP-64A |
Screw Terminal (M3 x 96) |
| EPD-96 |
Screw Terminal (M3.5 x 96) |
| EPD-96A |
Screw Terminal (M3 x 96) |
| PCA96P-1.5 |
A one end connector flat cable for 96 pin Half-Pitch connectors with(1.5m) |
| PCA96PS-0.5P |
A one end connector shield cable for 96 pin Half-Pitch connectors with(Mold type, 0.5m) |
| PCA96PS-1.5P |
A one end connector shield cable for 96 pin Half-Pitch connectors with(Mold type, 1.5m) |
| PCB96P-1.5 |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 0.5m) |
| PCB96PS-0.5P |
Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(0.5m) |
| PCB96PS-0.5P |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 0.5m) |
| PCB96PS-1.5P |
Both sides with connector shield cable for 68 pin 0.8mm pitch connectors(1.5m) |
| PCB96PS-1.5P |
A both ends connector shield cable for 96 pin half pitch connectors with(Mold type, 1.5m) |
| POW-AD13GY |
F&eIT series AC-DC Power Supply Unit Input 85-132VAC, Output 5VDC 3A |
| POW-AD22GY |
F&eIT series AC-DC Power Supply Unit Input 85-264VAC, Output 5VDC 2A |
| POW-DD10GY |
F&eIT series DC-DC Power Supply Unit Input : DC10-30V, Output : DC5V 3A |
| POW-DD43GY |
F&eIT series DC-DC Power Supply Unit Input : DC30-50V, Output : DC5V 3A | |
产品详细介绍
当前位置：
