This product is an USB2.0-compliant digital I/O unit that extends the input and output function of digital signal from the USB port of PC.
Compact design not restricting installation location (188.0(W) x 78.0(D) × 30.5(H)) makes it easy to install the product within the panel or device using DIN rail mounting jigs, or on the floor or wall.
This product is compatible with digital input and output signals at 5 - 50VDC which features 16 channels of opto-coupler isolated inputs (compatible with current sink output) and 16 channels of opto-coupler isolated open-collector outputs(compatible with current sink type), equipped with output transistor protection circuit (surge voltage protection and over current protection).
Windows driver library is supplied. Possible to be used as a data recording device for LabVIEW, with dedicated libraries.
Certification
Environmental
RoHS Directive
Features
- Installation on the floor / wall /ceiling is possible by screw fastening, magnet, rubber feet, etc. In addition, DIN rail mounting mechanism is equipped as standard with the product, making it easy to install the product within the panel or the device.
- Compact design of 188.0(W) × 78.0(D) × 30.5(H) does not require special installation location.
- Adoption of terminal connector (with screws) enables to achieve easy wiring.
- This product has 16 channels of optocoupler isolated inputs, compatible with current sink output of of 5 - 50 VDC whose response speed is 200μsec. 16 channels share one common. As the power to run the opto-couplers is supplied internally, no external power supply is required.
- This product has 16 channels of opto-coupler isolated open-collector outputs (current sink type) whose response speed is 200μsec, supporting driver voltages of 5- 50 VDC for I/O. The output rating is max.100mA per channel. Common terminal provided per 8 channels, capable of supporting a different external power supply.
- As the USB I/F on PC is isolated from the input and output interfaces by opto-couplers, this product has excellent noise performance.
- Using the attached digital I/O driver API-DIO(WDM) makes it possible to create applications of Windows. In addition, a diagnostic program by which the operations of hardware can be checked is provided.
- Using the dedicated library VI-DAQ makes it possible to make a LabVIEW application.
Specification
Digital I/O
Response speed 200µsec(max.)
Operation voltage Input: 0--50VDC
Operation voltage Output: 5--50VDC
Input circuit Opto-isolated input (Sink output)
Output circuit Opto-isolated open collector output (Sink type)
Page Top
Options
| Product Code |
Product |
| VI-DAQ |
LabVIEW用数据采集VI程序库 | |
产品详细介绍
当前位置：
